Table of Contents
Advertisement
Table 50 Command Summary: Configuration Mode (continued)
COMMAND
priority-profile
<name>
radius-server
host <ip>
remote-
<index>
management
service-control
ftp <socket-number>
http <socket-number>
<1-255>
https <socket-number>
icmp
snmp
ssh <socket-number>
telnet <socket-number>
snmp-server
[contact <system
contact>] [location
<system location>]
get-community
<property>
set-community
<property>
trap-community
<property>
trap-destination <ip>
ssh
known-hosts <host-ip>
<1024|ssh-rsa|ssh-dsa>
<key>
OMC-2301 User's Guide
Chapter 19 Introducing the Commands
[auth-port <1024-
65535>] [key <key-
string>]
start-addr <ip>
end-addr <ip>
service
[telnet][ftp][http
][icmp][snmp][ssh]
[https]>
DESCRIPTION
Sets a descriptive name for the
priority profile and access the
priority-profile mode.
See
Section 19.10.9 on page
171
for the available
commands.
Sets the IP address of the
external RADIUS server,
Sets the authentication port
and shared key for the external
RADIUS server.
Enables a remote management
setting.
Specifies a group of trusted
computer(s) from which an
administrator may use a
service to manage the OMC.
Allows FTP access on the
specified service port.
Allows HTTP access on the
specified service port and
defines the timeout period.
Allows HTTPS access on the
specified service port.
Allows ICMP access for
services like Ping.
Allows SNMP management.
Allows SSH access on the
specified service port.
Allows Telnet access on the
specified service port.
Sets the geographic location
and the name of the person in
charge of this OMC.
Sets the get community.
Sets the set community.
Sets the trap community.
Sets the IP addresses of up to
four stations to send your
SNMP traps to.
Adds a remote host to which
the OMC can access using
SSH service.
163
Advertisement
Table of Contents
Troubleshooting
