ZyXEL Communications OMC-2301 User Manual page 169

Table 54 epon-profile Commands (continued)
COMMAND
dba
dn-policing
dn-queue
dn-queue-policing
encryption-mode
<both|downstream>
end
exit
no
OMC-2301 User's Guide
Chapter 19 Introducing the Commands
DESCRIPTION
Sets the delay tolerance.
delay <low|high>
low
get services faster. Recommended for
real-time applications.
high
gets less service time slots.
Sets the minimum and maximum
min-up-bw <0-
upstream bandwidth.
16000> max-up-bw
<16-16000>
Sets the priority for the logical link to
priority-class
which this profile is applied.
<0-7>
Enables policy settings on the
downstream traffic.
Sets the maximum size allowed (in
max-burst <0-
Kb) for a single downstream burst.
8191>
Sets the maximum downstream
max-dn-bw <0-
bandwidth (in Kbps). The number you
8000>
entered is multiplied by 64.
Enables downstream priority queuing.
Sets the queue size.
queue <0-3> size
<0-9152>
Enables downstream queue policing.
Sets the maximum bandwidth for the
queue <0-3> max-
queue.
bw <1-10000>
Sets data encryption on the
downstream and/or upstream traffic.
Exits from the epon-profile mode.
Exits from the configuration mode.
Disables this profile.
active
Disables MAC address learning for
address-learning
this profile.
Disables policy settings on the
dn-policing
downstream traffic.
Disables downstream priority queuing.
dn-queue
Disables downstream queue policing.
dn-queue-
policing
Disables data encryption.
encryption-mode
Disables auto-negotiation on the PON
onu-phy auto-
port.
negotiation
Disables flow control for the
onu-phy flow-
connection to the ONU.
control
Enables the connection to the ONU.
onu-phy power-
down
Disables upstream priority queuing.
up-queue
Disables upstream queue policing.
up-queue-
policing
: Low delay tolerance. Packets
: High delay tolerance. Packets
169