ZyXEL Communications OMC-2301 User Manual page 157

Table 49 Command Summary: Enable Mode (continued)
COMMAND
epon-counter
epon-da-filter
epon-daily-counter
epon-onu4-profile
epon-profile
hardware-monitor <C|F>
https
igmp-group
ip
logging
mac-address
OMC-2301 User's Guide
Chapter 19 Introducing the Commands
DESCRIPTION
Displays PON port status or detailed
<port-number>
LLID status.
<llid>
Displays fiber port statistics on the OLT.
<port-number>
Displays the ONU counters on the OLT.
<port-number>
<llid>
Displays the counters obtained from the
onu <port-number>
ONU.
<llid>
Displays destination address (DA)
<port-number>
filter(s) configured on the specified port.
Displays the EPON daily counters on a
<port-number>
port.
A port number contains three or four
digits, such as 101 or 1402. The digit(s)
before 0 in a port number corresponds to
the card slot on the OLT, and the last digit
denotes the port type (1 for PON port
and 2 for uplink port).
Displays the daily ONU counters on a
<port-number>
link.
<llid>
Displays the daily link statistics on the
onu <port-number>
link ID(s).
<llid>
Displays EPON 4-port ONU profile
summary table.
Displays detailed settings of the specified
<profile-name>
EPON 4-port ONU profile.
Displays EPON profile summary table.
Displays detailed settings of the specified
<profile-name>
EPON profile.
Displays system statistics and
temperature.
Displays the HTTPS information.
Displays the HTTPS certificates.
certificate
Displays the HTTPS key.
key <rsa|dsa>
Displays current HTTPS session(s).
session
Displays the HTTPS session timeout.
timeout
Displays IGMP settings on the OMC.
Displays port IGMP member information.
<port-number>
Displays LLID IGMP member
<port-number>
information.
<llid>
Displays the IP settings.
Displays system logs.
Displays MAC address table on the PON
<port-number>
port.
Displays MAC address table on the
<port-number>
logical link.
llid
157