ZyXEL Communications OMC-2301 User Manual page 153

Table 48 Command Summary: User Mode (continued)
COMMAND
<port-num>
ping <ip|host-name> [ size <0-
help
show classifier-
filter-profile
dba-mode
epon
epon-counter
epon-da-filter <port-number>
epon-daily-
counter
epon-onu4-
profile
epon-profile
hardware-
monitor <C|F>
igmp-group
OMC-2301 User's Guide
DESCRIPTION
Removes all learned MAC address on the specified
port(s).
Sends Ping request to an Ethernet device.
1472> ][ -t ]
Displays command help information.
Displays the classifier filter profile summary table.
Displays the dynamic bandwidth allocation mode the
OMC is using.
Displays the PON port status.
Displays ONU information on the specified PON port.
<port-number>
A port number contains three or four digits, such as 101
or 1402. The digit(s) before 0 in a port number
corresponds to the card slot on the OLT, and the last
digit denotes the port type (1 for PON port and 2 for
uplink port).
Displays the ONU status on a logical link on the
<port-number>
specified PON port.
<llid>
Displays the port statistics of the specified PON port.
<port-number>
Displays the connection statistics of the ONU on the
<port-number>
specified logical link.
<llid>
Displays ONU connection counters.
onu <port-
number> <llid>
Displays destination address (DA) filter(s) configured on
the specified port.
Displays the EPON daily counters on a port.
<port-number>
A port number contains three or four digits, such as 101
or 1402. The digit(s) before 0 in a port number
corresponds to the card slot on the OLT, and the last
digit denotes the port type (1 for PON port and 2 for
uplink port).
Displays the daily link statistics on the link ID(s).
onu <port-
number> <llid>
Displays the EPON 4-port ONU profile summary table.
Displays the EPON profile summary table.
Displays the hardware temperature and statistics.
Displays the IGMP table.
Displays the IGMP table on the specified PON port.
<port-number>
A port number contains three or four digits, such as 101
or 1402. The digit(s) before 0 in a port number
corresponds to the card slot on the OLT, and the last
digit denotes the port type (1 for PON port and 2 for
uplink port).
Displays the IGMP table for the specified logical link.
<port-number>
<llid>
Chapter 19 Introducing the Commands
153