Table of Contents
Advertisement
2 In the Remote Firmware Upgrade screen, select a port number in the Port Select field
and click Get LLID to display the associated LLID(s).
3 Select an ONU to which you want to upgrade the firmware. You can select multiple
entries by holding down the [SHIFT] or [CTRL] key.
4 Click Upgrade to start the firmware update process.
Although you can select up to 32 ONUs on a port, the OMC updates firmware
to one ONU at a time starting from the one with the smallest index number.
14.5 Line Card Reset
Use the Line Card Reset screen to reset the selected line card(s).
Resetting line cards disconnects the links. Resetting line cards does NOT
restart the OMC.
Follow the steps below to reset the line cards.
1 Access the Line Card Reset screen from the Maintenance screen.
Figure 62 Maintenance: Line Card Reset
2 Select the line card(s) you want to reset in the list box. You can select multiple entries by
holding down the [SHIFT] or [CTRL] key.
3 Click Reset to reset the selected card(s).
OMC-2301 User's Guide
Chapter 14 Maintenance
125
Advertisement
Table of Contents
Troubleshooting
