Testing The Internet Connection - ZyXEL Communications OMC-2301 User Manual

8 Select 100M in the EPON Profile field to apply the bandwidth settings and click Add.
9 The OMC automatically applies the settings to the ONU. Display the EPON Info screen
again to check the settings (click Status > PON Port 101).
You should see that the upstream and downstream bandwidths for the ONU are set to
100 Mbps.

4.4 Testing the Internet Connection

In this section, you test Internet access through the ONU as a subscriber.
1 Connect your computer to the Ethernet port on the ONU.
Make sure the computer is set to use a dynamic IP address.
2 Open a web browser and enter any web site address (for example, www.zyxel.com).
When the web site displays, you have successfully accessed the Internet through the
PON.
OMC-2301 User's Guide
Chapter 4 Initial Setup Example
45