C
H A P T E R
24.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
•
Power, Hardware Connections, and LEDs
•
NWA Access and Login
•
AP Management Modes
•
Internet Access
•
Wireless Router/AP Troubleshooting
24.2 Power, Hardware Connections, and LEDs
The NWA does not turn on. None of the LEDs turn on.
• Make sure you are using the power adaptor or cord included with the NWA.
• Make sure the power adaptor or cord is connected to the NWA and plugged in to
an appropriate power source. Make sure the power source is turned on.
• Disconnect and re-connect the power adaptor or cord to the NWA.
• If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
• Make sure you understand the normal behavior of the LED. See
page
34.
• Check the hardware connections. See the Quick Start Guide.
NWA-3500/NWA-3550 User's Guide
Troubleshooting
24
Section 1.7 on
289