Restore Configuration - ZyXEL Communications NWA-3500 User Manual

configuration file before making configuration changes. The backup configuration
file will be useful in case you need to return to your previous settings.
Click Backup to save the NWA's current configuration to your computer.

23.8.2 Restore Configuration

Restore configuration allows you to upload a new or previously saved
configuration file from your computer to your NWA.
Table 87 Restore Configuration
LABEL
File Path
Browse...
Upload
Do not turn off the NWA while configuration file upload is in
progress.
After you see a "restore configuration successful" screen, you must then wait one
minute before logging into the NWA again.
Figure 175 Configuration Upload Successful
The NWA automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 176 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default NWA IP
NWA-3500/NWA-3550 User's Guide
DESCRIPTION
Type in the location of the file you want to upload in this field or click
Browse ... to find it.
Click Browse... to find the file you want to upload. Remember that
you must decompress compressed (.ZIP) files before you can upload
them.
Click Upload to begin the upload process.
Chapter 23 Maintenance
283