ZyXEL Communications NWA-3500 User Manual page 208

Chapter 16 Remote Management Screens
Table 59 SNMP Traps
TRAP NAME
authenticationFailure
(defined in RFC-1215)
Traps defined in the ZyXEL Private MIB.
whyReboot
pwTFTPStatus
Some traps include an SNMP interface index. The following table maps the SNMP
interface indexes to the NWA's physical and virtual ports.
Table 60 SNMP Interface Index to Physical and Virtual Port Mapping
TYPE
Physical
Virtual
208
OBJECT IDENTIFIER #
(OID)
1.3.6.1.6.3.1.1.5.5
1.3.6.1.4.1.890.1.5.1
3.0.1
1.3.6.1.4.1.890.1.9.2.
3.3.1
INTERFACE
enet0
enet1
enet2
enet3 ~ enet9
enet10 ~ enet16
enet17 ~ enet21
enet22 ~ enet26
DESCRIPTION
The device sends this trap when it
receives any SNMP get or set
requirements with the wrong community
(password).
Note: snmpEnableAuthenTraps, OID
1.3.6.1.2.1.11.30 (defined in RFC 1214
and RFC 1907) must be enabled on in
order for the device to send
authenticationFailure traps. Use a MIB
browser to enable or disable
snmpEnableAuthenTraps.
This trap is sent with the reason for
restarting before the system reboots
(warm start).
"System reboot by user!" is added for an
intentional reboot (for example,
download new files, CI command "sys
reboot").
If the system reboots because of fatal
errors, a code for the error is listed.
This trap is sent to indicate the status
and result of a TFTP client session that
has ended.
PORT
Wireless LAN adaptor
WLAN1
Ethernet port (LAN)
Wireless LAN adaptor
WLAN2
WLAN1 in MBSSID mode
WLAN2 in MBSSID mode
WLAN1 in WDS mode
WLAN2 in WDS mode
NWA-3500/NWA-3550 User's Guide