ZyXEL Communications NWA-3500 User Manual page 256

Chapter 20 VLAN
Using the Remote Access Policy option on the Internet Authentication Service
1
management interface, create a new VLAN Policy for each VLAN Group defined in
the previous section. The order of the remote access policies is important. The
most specific policies should be placed at the top of the policy list and the most
general at the bottom. For example, if the Day-And-Time Restriction policy is still
present, it should be moved to the bottom or deleted to allow the VLAN Group
policies to take precedence.
Right click Remote Access Policy and select New Remote Access Policy.
1a
Enter a Policy friendly name that describes the policy. Each Remote Access
1b
Policy will be matched to one VLAN Group. An example may be, Allow - VLAN
10 Policy.
Click Next.
1c
Figure 146 New Remote Access Policy for VLAN Group
The Conditions window displays. Select Add to add a condition for this policy to
2
act on.
256
NWA-3500/NWA-3550 User's Guide