Password Screen - ZyXEL Communications NWA-3500 User Manual

7.3 Password Screen

Use this screen to control access to your NWA by assigning a password to it. Click
System > Password. The following screen displays.
Figure 71 System > Password.
Note: Even if you uncheck Enable Admin at Local, you still use the password set
here to log in via the console port (not available on all models).
The following table describes the labels in this screen.
Table 20 System > Password
LABEL
Enable Admin at
Local
Use old setting
Use new setting
Old Password
New Password
Retype to
Confirm
Enable Admin on
RADIUS
Use old setting
NWA-3500/NWA-3550 User's Guide
DESCRIPTIONS
Select this check box to have the device authenticate local
management logins to the device.
Select this to have the NWA use the local management password
already configured on the device ("1234" is the default).
Select this if you want to change the local management password.
Type in your existing system password ("1234" is the default
password).
Type your new system password (up to 31 characters). Note that as
you type a password, the screen displays an asterisk (*) for each
character you type.
Retype your new system password for confirmation.
Select this (and configure the other fields in this section) to have a
RADIUS server authenticate management logins to the NWA.
Select this to have a RADIUS server authenticate management
logins to the NWA using the RADIUS username and password
already configured on the device.
Chapter 7 System Screens
113