Configuring Layer-2 Isolation - ZyXEL Communications NWA-3500 User Manual

Chapter 12 Layer-2 Isolation Screen

12.2.1 Configuring Layer-2 Isolation

Use this screen to specify the configuration for your layer-2 isolation profile.
Select a layer-2 isolation profile in Wireless > Layer-2 Isolation and click Edit
to display the following screen.
Note: When configuring this screen, remember to select the correct layer-2 isolation
profile in the Wireless> SSID > Edit screen of the relevant SSID profile.
Figure 99 Layer-2 Isolation Configuration Screen
The following table describes the labels in this screen.
Table 47 Layer-2 Isolation Configuration
LABEL
Profile Name
Allow devices
with these MAC
addresses
176
DESCRIPTION
Type a name to identify this layer-2 isolation profile.
These are the MAC address of a wireless client, AP, computer or router.
A wireless client associated with the NWA can communicate with
another wireless client, AP, computer or router only if the MAC
addresses of those devices are listed in this table.
NWA-3500/NWA-3550 User's Guide