System Status Screen; Show Statistics Screen - ZyXEL Communications NWA-3500 User Manual

Chapter 23 Maintenance
Find firmware at www.zyxel.com in a file that (usually) uses the system model
name with a "*.bin" extension, for example "[Model #].bin". The upload process
uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a
successful upload, the system will reboot. See the Firmware and Configuration
File Maintenance chapter for upgrading firmware using FTP/TFTP commands.

23.4 System Status Screen

Use this screen to get a quick summary of the status of your NWA. Click
Maintenance > System Status. The following screen displays.
Figure 166 Maintenance > System Status
The following table describes the labels in this screen.
Table 82 Maintenance > System Status
LABEL
System Name
ZyNOS Firmware
Version
IP Address
IP Subnet Mask
DHCP
Show Statistics

23.4.1 Show Statistics Screen

Use this screen to view diagnostic information about the NWA. Click Maintenance
> Show Statistics. The following screen pops up.
276
DESCRIPTION
This is the System Name you can configure in the SYSTEM >
General screen. It is for identification purposes
This is the ZyNOS Firmware version and date created. ZyNOS is
ZyXEL's proprietary Network Operating System design.
This is the Ethernet port IP address.
This is the Ethernet port subnet mask.
This is the Ethernet port DHCP role - Client or None.
Click Show Statistics to see the NWA performance statistics such
as number of packets sent and number of packets received for each
port.
NWA-3500/NWA-3550 User's Guide