ZyXEL Communications NWA-3500 User Manual page 77

If the Registration Type is set to Manual, the controller AP add managed APs to
a queue in the Un-Managed Access Points List in the Controller > AP Lists
screen.
If the Registration Type is set to Always Accept, the controller AP immediately
adds the AP to the Managed Access Points List in the Controller > AP Lists
screen.
For this example, we set the Registration Type to Manual.
To add a managed AP to the controller AP's coverage, go to Controller > AP
1
Lists.
Figure 50 Tutorial: AP List (Un-Managed)
Select the NWA managed APs from the Un-Managed Access Points List as
2
shown in the screen above. You can also identify these managed APs by filling in
the Description field. Click Add.
The 2nd, 3rd and 4th floor NWA managed APs (B, C and D) should now be in the
3
Manged Access Points List. By default, newly added managed APs in the list
have their WLAN Radio Profile set to disabled. This means that their wireless
functions are turned off.
Note: The NWA controller AP uses WLAN Radio Profile to categorize different
wireless settings present in a managed AP. Each profile contains the SSID,
security mode, RADIUS, Layer-2 Isolation and MAC filter configurations.
NWA-3500/NWA-3550 User's Guide
Chapter 3 Tutorial
77