Redundancy Screen; The Profile Edit Screens - ZyXEL Communications NWA-3500 User Manual

Chapter 6 AP Controller Mode

6.6 Redundancy Screen

Use this screen to set the controller AP as a primary or secondary controller.
If you set your NWA as a primary controller AP, you can have a secondary
controller AP to serve as a backup. All configurations are synchronized between
the NWA and the secondary controller AP.
When the NWA is in AP controller mode, click CONTROLLER > Redundancy. The
following screen displays.
Figure 66 Redundancy Screen
The following table describes the labels in this screen.
Table 15 Redundancy Screen
LABEL
Redundancy
Primary AP Controller
Secondary IP
Secondary AP Controller
Apply
Reset

6.7 The Profile Edit Screens

This section describes the Profile Edit screens, which are available only in AP
controller mode.
The following Profile Edit screens are identical to those in standalone mode:
102
DESCRIPTION
Select Enable to set the NWA either as a Primary AP
Controller or as a Secondary Controller AP.
Select Disable when the NWA acts as a primary AP
controller without a backup.
Select this if the NWA has a secondary controller AP. You
must give the IP address of this backup in the field below.
Enter the IP address of the secondary controller AP.
Select this if the NWA is the secondary controller AP.
Click this to save the changes in this screen.
Click this to return the fields in this screen to their
previously-saved values.
NWA-3500/NWA-3550 User's Guide