Chapter 6 AP Controller Mode
6.4.1 The AP Lists Edit Screen
Use this screen to change the description or radio profile of an AP managed by the
NWA. Click Edit in the CONTROLLER > AP Lists screen. The following screen
displays.
Figure 64 AP Configuration Screen
The following table describes the labels in this screen.
Table 13 AP Configuration Screen
LABEL
Model
MAC Address
Description
Enable Breathing LED
WLAN1 Radio Profile
WLAN2 Radio Profile
Apply
Reset
100
DESCRIPTION
This is the model number of the managed AP.
This is the MAC address of the managed AP.
Enter a short description of this access point (up to 32 English
keyboard characters).
Select this box to disable the WLAN LED (light). Clear this box to
enable the WLAN LED.
Select the radio profile you want to use for this AP. Configure
radio profiles in the Profile Edit > Radio screen.
Select Disable if you do not want to use a radio profile. The AP's
radio is not active when you select Disable.
Your AP has dual radios.
Select the second radio profile you want to use for this AP.
Configure radio profiles in the Profile Edit > Radio screen.
Select Disable if you do not want to use a second radio profile.
The AP's radio is not active when you select Disable.
Click this to save the changes in this screen.
Click this to return the fields in this screen to their previously-
saved values.
NWA-3500/NWA-3550 User's Guide