Hosting Conference Calls; Setting Up Conferences - Polycom SoundStation IP 6000 User Manual

User Guide for the Polycom SoundStation IP 6000 Phone
Note

Hosting Conference Calls

Setting Up Conferences

3 - 6
To place a call on hold:
During a call, press the Hold soft key. The console LEDs flash red to
>>
indicate that a call is on hold.
The following screen shows Jane Smith on hold. The Resume soft key now
displays on the screen.
To resume a call on hold:
While a call is on hold, press the Resume soft key.
>>
To end a call on hold, you must resume the call first.
You can create a conference with up to two other parties using the phone's
local conference feature. To quickly set up a conference, you can use the
Join soft key to create a conference between an active call and a call on hold.
After you set up a conference, you can hold the conference call, split the
conference call into individual calls on hold, or end the conference call (and
your connection to the conference call participants).
This section includes the following topics:
• Setting Up Conferences
• Holding and Resuming Conferences
• Splitting Conferences
• Ending Conferences
You can set up a conference in one of two ways:
• Using the Confrnc soft key.
• Using the Join soft key, if you have an active call and a call on hold.
on page 3-6
on page
on page 3-8
on page 3-9
3-8