Performing A Blind Transfer; Forwarding Calls - Polycom SoundStation IP 6000 User Manual

User Guide for the Polycom SoundStation IP 6000 Phone

Performing a Blind Transfer

Forwarding Calls

Note
3 - 10
3. When you hear the ring-back sound, press the Trnsfer soft key. The
transfer is complete.
If you want to talk privately to the person to whom you are transferring
the call before the transfer is complete, wait until the person answers the
call, talk to the person, and then press the Trnsfer soft key.
To cancel the transfer before the call connects, press the Cancel soft key.
When you use a blind transfer, you transfer a call without speaking to the
party to whom you are transferring the call. The call is automatically
transferred as soon as you dial the party's number.
To perform a blind transfer:
1. During a call, press the Trnsfer soft key.
The following screen, with the Blind soft key, displays.
2. Press the Blind soft key, and then place a call to the party to whom you
want to transfer the call. See
(If you want to cancel the transfer before the call is placed, and return to
the original call, press the Cancel soft key.)
The call automatically transfers to the party you specified.
Your company's settings may override this feature. For more information, contact
your system administrator.
Call forwarding is not available on shared lines.
You can set up your phone to forward incoming calls to another party (static
forwarding), or you can forward a call as your phone rings (dynamic
forwarding). Your phone will forward calls even if you enable the Do Not
Disturb Feature.
You can also reject calls from a particular contact (by sending the call to your
voice mail system), or divert calls from a particular contact to another party.
For more information, see
Placing Calls on page 3-2.
Managing Incoming Calls on page 2-24.