Confirm Save Screen; Table 9 Station Mode: Security Settings: Ieee 802.1X - ZyXEL Communications AG-225H User Manual

The following table describes the labels in this screen.

Table 9 Station Mode: Security Settings: IEEE 802.1x

LABEL
Authentication
Type
Login Name
Password
Certificate
Server CA
PEAP Inner EAP
Back
Next
Exit

4.3.2 Confirm Save Screen

Use this screen to confirm and save the security settings.
Chapter 4 Wireless Station Mode Configuration
DESCRIPTION
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS and
PEAP.
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
This field is only available when you select TLS in the Authentication Type field.
Click Browse to select a certificate.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Select a certificate authority (CA) from the drop-down box to have the AG-225H v2
trust certificates from that CA only. Select Trust Any to accept certificates from any
CA.
This field is only available when you select PEAP in the Authentication Type field.
The PEAP method used by the RADIUS server or AP for client authentication is
MS CHAP v2.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to Section 4.3.2 on page
Click Exit to return to the Site Survey screen without saving.
ZyXEL AG-225H v2 User's Guide
47.
47