Table 9 Station Mode: Security Settings: Ieee 802.1X; Confirm Save Screen - ZyXEL Communications ZyXEL AG-220 User Manual

The following table describes the labels in this screen.

Table 9 Station Mode: Security Settings: IEEE 802.1x

LABEL
Authentication
Type
Login Name
Password
Certificate
Validate Server
Certificate
PEAP Inner EAP
Back
Next
Exit

4.3.2 Confirm Save Screen

Use this screen to confirm and save the security settings.
Chapter 4 Wireless Station Mode Configuration
DESCRIPTION
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS and
PEAP.
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
Note: At the time of writing this field is not available on Windows
Vista.
This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
Note: At the time of writing this field is not available on Windows
Vista.
This field is only available when you select TLS in the Authentication Type field.
Click Browse to select a certificate.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Select the check box to check the certificate of the authentication server.
This field is only available when you select PEAP in the Authentication Type field.
The PEAP method used by the RADIUS server or AP for client authentication is
MS CHAP v2.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to Section 4.3.2 on page
Click Exit to return to the Site Survey screen without saving.
ZyXEL AG-220 User's Guide
60.
59