Adding A New Profile; Figure 32 Station Mode: Profile: Add A New Profile; Table 12 Station Mode: Profile: Add A New Profile - ZyXEL Communications AG-225H User Manual

ZyXEL AG-225H v2 User's Guide
Table 11 Station Mode: Profile (continued)
LABEL
SSID
Channel
Security
Transfer Rate

4.4.1 Adding a New Profile

Follow the steps below to add a new profile.
1 Click Add in the Profile screen. An Add New Profile screen displays as shown next.
Click Next to continue.

Figure 32 Station Mode: Profile: Add a New Profile

The following table describes the labels in this screen.

Table 12 Station Mode: Profile: Add a New Profile

LABEL
Add New Profile
Profile Name
SSID
Network Type
Next
Exit
50
DESCRIPTION
This field displays the SSID (Service Set IDentifier) of the profile.
This field displays the channel number used by the profile.
This field shows whether data encryption is activated (WEP, WPA, WPA-PSK,
WPA2, WPA2-PSK, 802.1x) or inactive (DISABLE).
This field displays the transmission speed of the selected profile in megabits per
second (Mbps).
DESCRIPTION
Enter a descriptive name in this field.
Select an available wireless device in the Scan Info table and click Select, or enter
the SSID of the wireless device to which you want to associate in this field
manually. Otherwise, enter Any to have the AG-225H v2 associate to any AP or
roam between any infrastructure wireless networks.
Select Infrastructure to associate to an AP. Select Ad-Hoc to associate to a peer
computer.
Click Next to go to the next screen.
Click Exit to go back to the previous screen without saving.
Chapter 4 Wireless Station Mode Configuration