The Link Info Screen; Figure 23 Station Mode: Link Info; Table 3 Station Mode: Link Info - ZyXEL Communications AG-225H User Manual

ZyXEL AG-225H v2 User's Guide

4.2 The Link Info Screen

When the ZyXEL utility starts, the Link Info screen displays, showing the current
configuration and connection status of your AG-225H v2.

Figure 23 Station Mode: Link Info

The following table describes the labels in this screen.

Table 3 Station Mode: Link Info

LABEL
AP Mode
Station Mode
Wireless Network
Status
Profile Name
Network Name
(SSID)
AP MAC Address
Network Type
Transmission Rate This field displays the current transmission rate of the AG-225H v2 in megabits per
Security
Channel
Statistics
Transmit Rate
Receive Rate
40
DESCRIPTION
Use the check box to set the AG-225H v2 to operate in wireless station or access
point mode. Refer to Section 1.2.3 on page 21
This is the name of the profile you are currently using.
The SSID identifies the wireless network to which a wireless station is associated.
This field displays the name of the wireless device to which the AG-225H v2 is
associated.
This field displays the MAC address of the AP or peer computer to which the AG-
225H v2 is associated.
This field displays the network type (Infrastructure or Ad-Hoc) of the wireless
network.
second (Mbps).
This field displays whether data encryption is activated (WEP, 802.1x, TKIP (WPA/
WPA-PSK/WPA2/WPA2-PSK), AES (WPA/WPA-PSK/WPA2/WPA2-PSK)) or
inactive (DISABLE).
This field displays the radio channel the AG-225H v2 is currently using.
This field displays the current data transmission rate in kilobits per second (Kbps).
This field displays the current data receiving rate in kilobits per second (Kbps).
for more information.
Chapter 4 Wireless Station Mode Configuration