Confirm Save Screen; Figure 17 Confirm Save Screen; Table 9 Security Settings: 802.1X - ZyXEL Communications G-270S User Manual

ZyXEL G-270S User's Guide
The following table describes the labels in this screen.

Table 9 Security Settings: 802.1x

LABEL
Authentication
Type
Login Name
Password
Certificate
Validate Server
Certificate
PEAP Inner EAP
Back
Next
Exit

3.2.3 Confirm Save Screen

Use the Confirm Save screen to confirm and save the security settings.

Figure 17 Confirm Save Screen

42
DESCRIPTION
Select an authentication method from the drop down list. Options are TLS and
PEAP.
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
This field is only available when you select TLS in the Authentication Type field.
Select a certificate from the drop-down list box.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Select the check box to check the certificate of the authentication server.
This field is only available when you select PEAP in the Authentication Type
field.
The PEAP protocol is MS CHAP v2.
Click Back to go to the Site Survey screen to select and connect to other network.
Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to Section 3.2.3 on page
Click Exit to return to the Site Survey screen without saving.
42.
Chapter 3 ZyXEL Utility Configuration