Figure 34 Station Mode: Profile: Wireless Settings; Table 13 Station Mode: Profile: Select A Channel - ZyXEL Communications AG-225H User Manual

ZyXEL AG-225H v2 User's Guide
The following table describes the labels in this screen.

Table 13 Station Mode: Profile: Select a Channel

LABEL
Wireless Settings
Wireless Mode
Channel
3 If you selected Infrastructure network type in the first screen, select WEP, WPA,
WPA2, WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data
encryption. If you selected Ad-Hoc network type in the first screen, you can use only
WEP encryption method. Otherwise, select DISABLE to allow the AG-225H v2 to
communicate with the access points or other peer wireless computers without any data
encryption, and skip to step 5.

Figure 34 Station Mode: Profile: Wireless Settings

4 The screen varies depending on the encryption method you select in the previous screen.
The settings must be exactly the same on the APs or other peer wireless computers as
they are on the AG-225H v2. Refer to
on wireless security configuration.
52
DESCRIPTION
Choose a wireless frequency: 2.4GHz or 5GHz. The 2.4GHz frequency is used by
the IEEE 802.11b and IEEE 802.11g wireless standards, and the 5GHz frequency
is used by the IEEE 802.11a wireless standard.
Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Section 4.3.1 on page 43
Chapter 4 Wireless Station Mode Configuration
for detailed information