Confirm Save Screen; Figure 17 Confirm Save Screen; Table 9 Security Settings: 802.1X - ZyXEL Communications ZyXEL ZyAIR G-260 User Manual

ZyXEL G-260 User's Guide
The following table describes the labels in this screen.

Table 9 Security Settings: 802.1x

LABEL
Authentication
Type
Login Name
Password
Certificate
Browse
Validate Server
Certificate
PEAP Inner EAP
Save

3.2.3 Confirm Save Screen

Use the Confirm Save screen to confirm and save the security settings.

Figure 17 Confirm Save Screen

41
DESCRIPTION
Select an authentication method from the drop down list. Options are TLS and
PEAP.
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
This field is only available when you select TLS in the Authentication Type field.
Specify the location and name of a certificate in the Certificate field or click
Browse to locate it.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
This field is only available when you select TLS in the Authentication Type field.
Click this button to display the Select Certificate screen, select a certificate and
click OK.
Select the check box to check the certificate of the authentication server.
This field is only available when you select PEAP in the Authentication Type
field.
Use the drop-down list box to select a PEAP protocol. Options are MD5
CHALLENGE, TOKEN CARD and MS CHAP v2.
Click Save to save the changes back to the ZyXEL G-260 and display the Link
Info screen. Otherwise, click the close (
back to the Site Survey screen.
) button to discard changes and go
Chapter 3 ZyXEL Utility Configuration