Printing A Directory List; Placing Separator Sheets Between Copies; Stapling Printed Sheets; Punching Holes In Printed Sheets - Lexmark MX931 User Manual

Print

Printing a directory list

From the home screen, touch Settings > Reports > Print > Print Directory.

Placing separator sheets between copies

1
From the home screen, touch Settings > Print > Layout > Separator Sheets > Between Copies.
2
Print the document.

Stapling printed sheets

For Windows users
1
With a document open, click File > Print.
2
Select a printer, and then click Properties, Preferences, Options, or Setup.
3
Click Paper/Finisher.
If necessary, configure the Paper settings.
4
In the Finishing menu, select the staple setting.
5
Click OK or Print.
For Macintosh users
1
With a document open, choose File > Print.
2
Select a printer, and then from the drop-down menu following the Orientation menu, choose Finishing.
3
Click Staple, and then select a setting.
4
Click Print.

Punching holes in printed sheets

Note: Before you begin, make sure that the hole punch setting is configured. From the home screen, touch
Settings > Device > Maintenance > Configuration Menu > Finisher Configuration >Hole Punch
Configuration > select a configuration.
For Windows users
1
With a document open, click File > Print.
2
Select a printer, and then click Properties, Preferences, Options, or Setup.
3
Click Paper/Finisher.
If necessary, configure the Paper settings.
4
In the Finishing menu, select the hole punch setting.
5
Click OK or Print.
161