Pairing The Sph10H With Bluetooth Devices; Mobile Phone Pairing; Bluetooth Stereo Device Pairing - Sena SPH10H User Manual

SPH10H
6. PAIRING THE SPH10H WITH
BLUETOOTH DEVICES
Before using the SPH10H Bluetooth headset with any
of Bluetooth devices for the first time, you need to do
the pairing operation. It can be paired with Bluetooth
mobile phones, Bluetooth stereo devices such as MP3,
or motorcycle specific Bluetooth GPS, and with other
Sena Bluetooth headsets. This pairing operation is only
required once for each Bluetooth device. The headset
will remain paired with the devices and automatically
connects to the paired devices again when they are
within range. You will hear a high tone single beep and a
voice prompt when the headset connects to the paired
device automatically: "Phone connected" to a mobile
phone, "Media connected" to a Bluetooth stereo
device.

6.1 Mobile Phone Pairing

1. Turn on the headset and press the Phone Button for 5
seconds until the LED flashes red and blue alternately
and you hear multiple beeps. You will hear a voice
prompt saying "Phone pairing".
8
2. Search for Bluetooth devices on your mobile phone.
Select the Sena SPH10H in the list of the devices
detected on the mobile phone.
3. Enter 0000 for the PIN. Some mobile phone may not
ask for the PIN.
4. The mobile phone confirms that pairing has completed
and the SPH10H is ready to use. You will hear a voice
prompt from the SPH10H saying "Your headset is
paired".
5. If the pairing process is not completed within three
minutes, the SPH10H will return to stand-by mode.

6.2 Bluetooth Stereo Device Pairing

1. If the Bluetooth stereo device is integrated with the
mobile phone such as smartphones, you don't need
to pair the SPH10H with it separately. When the
SPH10H is paired with the mobile phone, it is also
paired as a stereo music device.
2. If you have a stand alone Bluetooth stereo device,
follow the paring procedure separately. The procedure
is the same as the procedure in "6.1 Mobile Phone
Pairing".