Pairing With Selective Profile: A2Dp Stereo Or Handsfree; A2Dp Stereo Music Only - Sena SPH10H User Manual

SPH10H
Smart Phone Two-way radio
HFP
Mobile Phone
+
Pairing
A2DP
HFP
Multipoint
SPH10H
Pairing
Radar Detector
Parallel Connection of SR10 and Mobile Phone by
Bluetooth Multipoint Pairing
12
Wired
Connection
Wired
Connection
GPS
Sena SR10
Wired
Connection
7. PAIRING WITH SELECTIVE PROFILE:
A2DP STEREO OR HANDSFREE
If you have a MP3 stereo music phone such as a
smartphone, sometimes you may need to selectively
use the SPH10H for A2DP stereo music only or for
mobile phone handsfree only. This instruction is for
advanced users who want to pair the SPH10H to their
smart phones only with one selective profile: A2DP
stereo for music or HFP for phone call.
If you have previously paired a mobile phone to the
SPH10H, you must clear the previous paring list on
both devices; the mobile phone and SPH10H. To clear
the pairing list on SPH10H, please do a factory reset
or follow the pairing list clearing procedure described
in this manual. To clear the pairing list on the mobile
phone, please refer to the mobile phone manual. For
most smart phones, delete the Sena SPH10H from the
list of Bluetooth devices in setting menu.

7.1 A2DP Stereo Music Only

1. Turn on the headset and press the Phone Button for 5
seconds until the LED flashes red and blue alternately
and you hear multiple beeps.