Enabling/Disabling Plc (Packet Loss Consealment); Delete All Bluetooth Pairing Information; Exit Voice Configuration Menu - Sena SPH10H User Manual

9.4 Enabling/Disabling PLC (Packet Loss
Consealment)
Voice Prompt
Factory Default
Enable
Disable
The PLC (Packet Loss Concealment) algorithm is
enabled from the factory. It improves the audio quality
of the intercom and mobile phone handsfree in the
presence of data packet errors within the Bluetooth
link. It is recommend that this setting is always enabled.
However, if you feel that the audio from the intercom or
mobile phone is distorted in certain circumstances, you
may able to disable this setting and check it.

9.5 Delete All Bluetooth Pairing Information

Voice Prompt
Factory Default
Execute
To delete all Bluetooth pairing information of the
SPH10H, rotate the Jog Dial until you hear a voice
prompt, "Delete all pairings", and tap the Phone
"PLC setting"
Enable
Tap the Phone Button
Tap the Jog Dial
"Delete all pairings"
N/A
Tap the Phone Button
Button to confirm. Taping the Jog Dial is not available
for this setting.

9.6 Exit Voice Configuration Menu

Voice Prompt
Factory Default
Enable
To exit voice configuration menu and get back to stand-
by mode, rotate the Jog Dial until you hear a voice
prompt, "Exit configuration", and tap the Phone
Button to confirm. Taping the Jog Dial is not available
for this setting.
Rotate Jog Dial Tap Phone Button
VOX Phone
VOX Intercom
Voice Prompt
PLC Setting
Delete All Pairings
Exit Configuration
Voice Configuration Menu & Button Operations
SPH10H
"Exit configuration"
N/A
Tap the Phone Button
Tap Jog Dial
Enable Disable
Enable Disable
Enable Disable
Enable Disable
Execute N/A
Execute N/A
17