Table of Contents
Advertisement
COLORado™ 1 Quad Tour QRG
AC Power
The COLORado™ 1 Quad Tour has an auto-ranging power supply that
works with an input voltage range of 100~240 VAC, 50/60 Hz.
Power Linking
You can link up to 11 COLORado™ 1 Quad Tour products at 120 VAC or
21 at 230 VAC. Make sure you never exceed the maximum number.
DMX Linking
The COLORado™ 1 Quad Tour will work with a DMX controller using a
regular DMX connection.
If you are not familiar with the DMX standard, download the DMX Primer
from www.chauvetpro.com.
DMX
The COLORado™ 1 Quad Tour uses a regular DMX data connection for
its DMX personalities: TOUR, ARC.1, AR1.D, ARC.2, AR2.D,
Connection
AR2.S, and HSV.
Download the COLORado™ 1 Quad Tour User Manual.
Refer to Setup and Operation to learn how to connect and configure this
product for DMX.
Master/Slave
The COLORado™ 1 Quad Tour uses the DMX data connection for its
Connection
Master/Slave mode.
Download the COLORado™ 1 Quad Tour User Manual.
Refer to Setup and Operation to learn how to connect and configure for
Master/Slave operation.
Page 5 of 12
Advertisement
Table of Contents
