4.0 Programming/Operation Instructions
4.1 LED Indicators
Designation
AC Power On
Alarm
Supervisory
System Trouble
Power Fault
Ground Fault
NAC 1 Silenced
NAC 2 Silenced
System Silenced
9000-0447 Rev. I
Figure 9 LED Indicators
Table 4-1 LED Indicators
Description
(green)
Lights to indicate presence of 120/240 VAC input.
(red)
Lights when system is in alarm, flashes until alarm is
acknowledged.
(yellow)
Lights when supervisory condition exists, flashes until
trouble acknowledge is performed.
(yellow)
Lights to indicate trouble condition, flashes until
trouble is acknowledged.
(yellow)
Lights during a LOW or NO Battery condition.
(yellow)
Lights to indicate a ground on a field conductor
(yellow)
Lights to indicate that NAC Circuit has been silenced
via the Signal Silence Switch (if programmed as
silenceable).
(yellow)
Lights to indicate that NAC Circuit has been silenced
via the Signal Silence Switch (if programmed as
silenceable).
(yellow)
Lights when a System Silence has been performed.
Flashes when disabled.
Page 23 of 42
Comments