Table 6-1 7100 Series Device Types And Functions - Honeywell Gamewell 7100 Series Installation & Operating Manual

# Device Type
1 Ion Sensor
2 Ion Duct Sensor
3 Photo Sensor
4 Photo Duct Sensor
5 Photo/Thermal
6 Thermal
7
8 Smoke Det
9 Manual Station
10 Plenum Det
11 N.O. Contact
12 Heat Det
13 SubLoop
14 Waterflow Silenceable
15 Beam Det
16 Duct Det
17 FACP Alarm
18 Remote Zone
19 Smoke/Heat
20 Supervisory Switch
(Non Latching)
21 Tamper Switch (Latching)
22 Waterflow NonSilenceable
23 Non-Reporting Actuator
Latch
Non-Reporting Actuator Nonlatch
24
Non-Reporting Ion Non latch
25
Non-Reporting Photo Non latch
26
27 Ion Multilevel
28 Photo Multilevel
29 Signal Silence
30 Reset
31 Drill
32 Alarm Acknowledge
33 Trouble/Supv Acknowledge
34 Aux
35 End-Of-Line
36 Silenceable Signal
37 Nonsilenceable Signal
38 Silenceable Contacts
39 Nonsilenceable Contacts
40
User-Defined Device Types
49
9000-0447 Rev. I

Table 6-1 7100 Series Device Types and Functions

Physical Response
Ion
Smoke
Alarm
Photo
Thermal
Alarm
Manual Alarm
AMM
Alarm
AMM Supervisory NL
Supervisory L
AMM Waterflow NS
AMM
Non-Report
Ion
Photo
Ion Multilevel
Photo
Silence
Reset
AMM
Fire Drill
Alrm Ack
Trbl/Supv Ack
AMM
Signal
AOM
(Output)
Form C
AOM
Choice of Alarm,
AMM Supervisory NL,
Tamper L,
Waterflow NS
Page 41 of 42
Action in Alarm Condition
Trips ALARM LED and
ALARM Relay
Trips other outputs per
Day Alarm or Night
Alarm Response, or by
group.
Smoke Alarm may be
verified or PAS;
Manual Alarm may be
PAS.
Trips general supervisory
outputs, SUPERVISORY
LED, TROUBLE Relay.
Same as ALARM but inhibits panel silence.
Activates group, but
produces no other
response.
Produces "Alert", "Action", or "Alarm" response
depending on global %-of-alarm settings
Produces the specified function
Aux
EOL
Alarm condition latches,
trouble condition is
restorable.
Alarms and Troubles
restore.
Alarms latch,
Trouble restore.
Alarms latch
Alarms restore
Non-latching
Used for address M99 only
Produces "Short" indication
No "Short" indication
Per selected response