Honeywell Gamewell 7100 Series Installation & Operating Manual page 38

Fire alarm control
Table of Contents

Advertisement

Main
Config
Outputs
Select
Main
Config
Outputs
Select
Type
Select
General Response
Select
I/O Group
Select
View
Main
Config
Groups
Main
Config
Groups
Select
General
Response
9000-0447 Rev. I
[CONFIG] 1: Type 2: General Resp 3: Groups
[L,AAA ] 5: Location
1: Opens Set Output Type Menu.
2: Opens Assign Output To Group(s) Menu.
3,4: Unused.
5: Opens Set SLC Device Location Menu.
6: Displays all settings for this device.
7: Copies settings of the specified device (last output modified).
[L,AAA]
34 Silenceable Signal AOM
Key in Output Type# or use <,>
<>: scroll through types which match this physical device # keys:
Enter type number (no restrictions: see Type Table)
Output device types cannot be edited.
If the new type is an input device, "OK" key returns to the System
Config Menu, otherwise to Output Config.
[L,AAA]
Activates for Day Alarm
[GNL
RSP] select condition 1: YES/NO
1: Toggles specified general group membership YES/NO.
[L,AAA]
Group 1:
[GROUPS]
Key in group # <,> change
<>: scrolls through list of general groups.
Number keys: set group number.
[L, 1AA]
Slncbl
ALd
ALn
ACT
SPV
<>: select which of the three possible groups to set.
Shows: SLC and Address, Type, Location, General responses,
Group membership. General responses show above abbreviations.
[SELECT]
Group number:
[GROUP ]
Key in group#
If the output is activated in that condition, or – if not.
# keys: enters group number.
<>: Scrolls up or down to next group.
[GROUP] Activates General Alarm (NO)
[ 03
] Activates Genrl Supervisory (YES)
OK: Accepts group number, opens Configure Group Menu.
1: Toggles General Alarm response on/off (applies to alarms
initiated by Alarm, Manual, Waterflow, and Aux devices, for both Day
and Night general alarm).
2: Toggles General Supervisory response on/off (applies to off-
normals initiated by Supervisory and Tamper devices).
If a group contains inputs of several types (an unusual case), the
appropriate general flag is applied for each new alarm/off-normal.
Page 32 of 42
6: View
7: Copy L,AAA
36
(00
=
NAC
Main Lobby
TOR
WKT
TBL
03
or
use
<,>
(YES)
none)
02
00
00

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gamewell-fci 7100 series

Table of Contents