Honeywell Gamewell 7100 Series Installation & Operating Manual page 45

Main
Log
Main
Log
Show Events
Main
Log
Print Log
Main
Log
9000-0447 Rev. I
[VIEW] 1:Display Log
[LOG ] 3:Clear Log
1: Opens Show Events Menu.
2: Opens Print Log Menu.
3: Prompts for OK; if accepted, clears the Event Log and resets
panel.
4: Initiates a sensor sensitivity printout.
(Display shows a log entry)
Scrolls through all logged events, beginning with the most recent
event. If user attempts to scroll beyond the end (or beginning) of
the log, End of log is displayed briefly, then the last (or first)
event is redisplayed.
Display cannot give instructions, since it contains all the
information about the event being displayed (same as the
display you would see when the event occurred).
[PRINT} 1: All events
[LOG]
If there is no log printout in progress, starts a printout as shown
above. Once the printout begins, or if a printout is in progress
when this menu is opened, the message and function change to
"3:Abort printout". Printout starts immediately, not when OK is
pressed.
If printout completes while this menu is still open, the text of the
menu doesn't change until the user presses a key.
[PANEL] Software
[INFO ] V1.2-001
Shows the system software version, time and date of the most
recent change to the configuration program, and number of the
menu used to make the change (i.e., what was changed).
Page 39 of 42
2: Print Log
4:Sens. Report
2:Last 20
Last Cfg. Change
12:23 07/23/99 33