Poe Led - Cisco Catalyst 3850 Hardware Installation Manual

Chapter 1 Product Overview
Figure 1-5
1
2
3
When you select the STACK LED mode, the representative STACK LEDs are green when the StackWise
ports are up, and the representative STACK LEDs are amber when the ports are down.

PoE LED

The PoE LED indicates the status of the PoE mode: either PoE, PoE+, or Cisco UPOE.
Table 1-10
Color
Off
Green
Blinking amber
OL-26779-02
STACK LED
Stack member 1
Stack member 2
Stack member 3
PoE LED Status
Status of PoE mode (PoE, PoE+, or Cisco UPOE)
PoE mode is not selected. None of the 10/100/1000 ports have been denied power
or are in a fault condition.
PoE mode is selected, and the port LEDs show the PoE mode status.
PoE mode is not selected. At least one of the 10/100/1000 ports has been denied
power, or at least one of the 10/100/1000 ports has a PoE mode fault.
4 5 6
4 LED blinks green to show that this is switch 1 in the stack.
5 LED is solid green to show that switch 2 is a stack member.
6
LED is solid green to show that switch 3 is a stack member.
Catalyst 3850 Switch Hardware Installation Guide
Front Panel
1
2
3
1-15