Stackpower Connector - Cisco Catalyst 3850 Hardware Installation Manual

Rear Panel
Table 1-17
Fan Module
FAN-T1=
Figure 1-8
For information about installing a fan module and fan specifications, see
and

StackPower Connector

The Catalyst 3850 switches have a StackPower connector for use with Cisco StackPower cables to
configure a switch power stack that includes up to four switches. A switch power stack can be configured
in redundant or power-sharing mode.
You can order these StackPower cables from your Cisco sales representative:
•
•
For details about connecting StackPower cables and StackPower guidelines, see the
StackPower Stack" section on page
Catalyst 3850 Switch Hardware Installation Guide
1-22
Switch Fan Module
24- and 48-Port Switch Airflow Patterns
Appendix A, "Technical Specifications."
CAB-SPWR-30CM (0.3-meter cable)
CAB-SPWR-150CM (1.5-meter cable)
Description
Fan Module
2-8.
Chapter 1 Product Overview
Cat alys t 365 0 24P
oE+ 4X1 G
Chapter 5, "Installing the Fan,"
"Planning a
OL-26779-02