Chapter 5 Installing The Fan; Fan Module Installation; Installation Guidelines; Installing A Fan Module - Cisco Catalyst 3850 Hardware Installation Manual

Fan Module Installation

Figure 5-1
1
2
Fan Module Installation

Installation Guidelines

Observe these guidelines when removing or installing a fan module:
•
•
•
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030

Installing a Fan Module

Pinch the fan module release handle, and slide the module out.
Step 1
You should replace the fan module within 5 minutes to avoid overheating the switch.
Caution
Catalyst 3850 Switch Hardware Installation Guide
5-2
Fan Module
1 2
4
Fan LED
Exhaust vent
Do not force the fan module into the slot. This can damage the pins on the switch if they are not
aligned with the module.
A fan module that is only partially connected can disrupt the system operation.
The switch supports hot swapping of the fan module. You can remove and replace the module
without interrupting normal switch operation.
3
3 Retainer clip
4
Extraction handles
Chapter 5 Installing the Fan
OL-26779-02