Configuring A Network Module; C3850-Nm-4-1G Module; C3850-Nm-4-10G Module - Cisco Catalyst 3850 Hardware Installation Manual

Chapter 3 Installing a Network Module

Configuring a Network Module

C3850-NM-4-1G module

All ports in this module are natively GigabitEthernet and are configured GigabitEthernet1/1/1 though
GigabitEthernet1/1/4. There are only four interfaces which are valid and the other four should not be
used even though they still show up in the CLI.
Interface
GigabitEthernet1/1/1
GigabitEthernet1/1/2
GigabitEthernet1/1/3
GigabitEthernet1/1/4
TenGigabitEthernet1/1/1
TenGigabitEthernet1/1/2
TenGigabitEthernet1/1/3
TenGigabitEthernet1/1/4

C3850-NM-4-10G module

All ports in this module default to 10G and should be configured as TenGigabitEthernet1/1/1 through
TenGigabitEthernet1/1/4, even when you are operating them as 1G using SFPs. There are only four
interfaces which are valid and the other four should not be used even though they still show up in the
CLI.
Interface
GigabitEthernet1/1/1
GigabitEthernet1/1/2
GigabitEthernet1/1/3
GigabitEthernet1/1/4
TenGigabitEthernet1/1/1
TenGigabitEthernet1/1/2
TenGigabitEthernet1/1/3
TenGigabitEthernet1/1/4
OL-26779-02
Configuring a Network Module
Action
Configure this interface
Configure this interface
Configure this interface
Configure this interface
Disregard
Disregard
Disregard
Disregard
Action
Disregard
Disregard
Disregard
Disregard
Configure this interface
Configure this interface
Configure this interface
Configure this interface
Catalyst 3850 Switch Hardware Installation Guide
3-7