Attaching The Rack-Mount Brackets - Cisco Catalyst 3850 Hardware Installation Manual

Chapter 2 Switch Installation
Figure 2-11
1
2
3

Attaching the Rack-Mount Brackets

To install the switch in a rack, use four Phillips flat-head screws to attach the long side of the brackets
to the switch for the front- or rear-mounting positions
brackets for the front-mounting position.
OL-26779-02
Rack-Mounting Brackets
1
2
3
19-inch brackets (C3850-RACK-KIT=)
Extension rails and brackets for four-point
mounting, includes 19-inch brackets.
(C3850-4PT-KIT=)
ETSI brackets (C3850-RACK-KIT=)
4
4 23-inch brackets (C3850-RACK-KIT=)
5 24-inch brackets (C3850-RACK-KIT=)
(Figure 2-12). Use four screws to attach the
Catalyst 3850 Switch Hardware Installation Guide
Installing the Switch
5
2-13