Loading the ribbon cartridge
About the paper/ink ribbon set
For printing, paper/ink ribbon set (not supplied) are required.
For details, refer to "About the paper/ink ribbon set" (gpage 38).
Notes
• Use ribbon cartridges and paper that are packaged together.
• Do not use paper that has already been printed on or ejected.
Setting the ribbon cartridge
1
Open the ribbon cartridge door.
2
Remove slack from the ribbon.
Turn the roll in the direction indicated by the arrow while holding the roller in place.
If the ribbon cartridge has been used before, take in any ribbon slack before loading.
Loading the ribbon cartridge
EN-19