Loading Ribbon Cartridge - Mitsubishi Electric CP30DW Operation Manual

BEFORE OPERATION
Be sure to turn on the power of this unit before loading a ribbon cartridge.
1 1 1
1 1
Remove the used ribbon cartridge by pressing the RIBBON
EJECT button.
When you use the unit for the first time, this operation is not
required.
2 2
2 2 2
Remove slack in the ink ribbon.
Turn the gear in the direction of the arrow (backside of the ribbon
cartridge) to remove slack.
If slack is left, the ink ribbon may be damaged when loaded.
3 3
3 3 3
Insert the ribbon cartridge into the ribbon cartridge loading
slot.
• Be sure to hold the handle.
• Insert the ribbon cartridge in the direction of the arrow with the
marking of "TOP SIDE" up.
The installation of print paper and ribbon cartridge is completed.
• Do not leave more than 15 sheets of print paper on the print outlet.
• Be sure to install the paper cassette properly. If it is not installed
properly, a paper jam may occur.
• Replace print paper and ribbon cartridge at the same time.
Do not put your hand inside the product from the paper cassette loading
slot or ribbon cartridge loading slot. This product has mechanical parts
(switches and rollers) and parts that are heated to a very high
temperature or sensitive to static electricity.
14

LOADING RIBBON CARTRIDGE

NOTE
NOTE
CAUTION
gear
(backside of the ribbon cartridge)