Installation Of Ink Ribbon - Mitsubishi Electric CP-D70DW Operation Manual

BEFORE OPERATION

INSTALLATION OF INK RIBBON

After installing the print paper, install the ink cassette into this unit.
Before installing the ink cassette into this unit, load the ink ribbon in the ink cassette.
• Place the ink cassette on a flat surface, when loading the ink ribbon.
• Select a place that is free of dust when loading the ink ribbon. Dust or dirt settling
on the ink ribbon results in poor print quality.
• Make sure that the shafts of the ink ribbon fit into the ink cassette firmly.
Load the ink ribbon in the ink cassette as shown below.
• Make sure to load it in the correct position.
3
1
Gear
Ink ribbon
Make sure to set the ink ribbon roller to the ditches firmly.
Turn the gears to eliminate any slack.
Place the ink cassette containing the ink ribbon in the position
as shown right.
Mount the ink cassette by holding the handle.
Make sure to set the ink cassette to the printer firmly.
• Do not touch the thermal head.
Fingerprints or dust on the thermal head will degrade the print quality.
Close the door.
• Do not touch the thermal head right after printing because it is
extremely hot. Otherwise you may get burned or injured.
• Note that the thermal head is quite sensitive to static electricity.
When you touch the thermal head while carrying static electricity
on your body, the thermal head may be damaged.
NOTE
4
3
Ditch
2
1
Handle
Ink cassette
CAUTION
CAUTION
NOTE
4
2
Handle
13