Ink Ribbon Installation - Mitsubishi Electric CP-M15 Operation Manual

BEFORE OPERATION
Press the POWER button on the front panel to turn on the
power.
Press the latch bar, pull out the printing unit forward, and
release the bar to open the door.
Rotate the front ink ribbon shaft forward to eliminate any loose
ribbon.
Place the ink ribbon in the position as shown in the illustration.
• Do not touch the thermal head. Fingerprints or dust on the
thermal head will degrade the print quality.
Do not touch the thermal head or the motor right after printing
because they will be extremely hot. Otherwise you may get
burned or injured.
Note that the thermal head is quite sensitive to static electricity.
When you touch the thermal head while carrying static electricity
on your body, the thermal head may be damaged.

INK RIBBON INSTALLATION

NOTE
CAUTION
NOTE
POWER button
10