Mitsubishi Electric CP-D2E User Manual page 9

WARNING
If this device acts abnormally, unplug it
Do not use the printer if it emits smoke, unusual smells, strange sounds, or becomes
unusually warm.
Use under these conditions may cause fire or electric shock.
Turn off and unplug the printer. Then contact your dealer.
Should any liquid or foreign objects get into the printer,
unplug the power cord
Do not allow any liquids, metals, or flammable objects to get into the printer.
This may cause fire or electric shock.
Turn off and unplug the printer. Then contact your dealer.
If the printer cabinet is damaged, unplug the power cord
Do not use this device if the cabinet (body) is damaged.
Use in this condition may cause fire or electric shock.
Turn off and unplug the printer. Then contact your dealer.
If the power cord is damaged, unplug it
Do not use a damaged power cord.
Use in this condition may cause fire or electric shock.
Turn the printer off, and unplug the power cord being careful not to touch any exposed
wires. Then contact your dealer.
Do not damage the power cord
Do not damage or modify the power cord.
A damaged power cord may result in fire or electric shock. To prevent damage, do not
bend the cord excessively or pull on the cord when unplugging. Take care no heavy
objects are placed on or roll over the cord.
If the power cord is damaged, contact your dealer.
Safety regulations
EN-9