Before Operation; Paper / Ink Ribbon Set; Installation Of Print Paper - Mitsubishi Electric CP9000DW Operation Manual

BEFORE OPERATION

Before printing,
1 1 1 1 1
Install the print paper to this unit. (pages 12-13)
2 2 2 2 2
Install the ink ribbon to this unit. (page 14-15)

PAPER / INK RIBBON SET

When using this unit, make sure to use the following types of the paper / ink ribbon set.
2 2 2 2 2
PAPER / INK RIBBON SET
Product name Print size
CK9035 9x13 (3.5x5")
CK9046 10x15 (4x6")
CK9046PST 10x15 (4x6")

INSTALLATION OF PRINT PAPER

When installing the print paper, make sure to turn on the power of this unit.
1 1 1 1 1
Attach the supplied paper flanges to both sides of the print paper.
When you pinch the latches on the paper flange, the stoppers retract into the shaft.
Attach the flanges to the print paper with the stoppers retracted.
Make sure that the flanges are attached to the print paper securely, and release the
latches.
• Take care not to pinch your fingers.
• Do not remove the sticker on the print paper yet.
• Do not slacken the paper. Any slack in the print paper may degrade the print quality.
Attach the spacers to the paper flanges as shown
right when using CK9035.
1. Fit the spacer to the paper flange with its
stoppers retracted.
2. Insert the latches of the spacer into the holes in
the flange and turn the spacer until it is locked.
Do not touch the thermal head.
Fingerprints or dust on the thermal head will degrade the print quality.
12
Number of prints Application
680 Surface-laminated color print
600 Surface-laminated color print
600 Surface-laminated color print for post card
NOTE
NOTE
Sticker