Connecting A Digital Camera To The Printer - Mitsubishi Electric CP-D2E User Manual

Connecting a digital camera to the printer

The procedure below assumes that you are connecting a PictBridge-compatible digital camera.
Use the USB cable supplied with the digital camera to connect.
1
Turn on the printer.
For details, refer to "Plugging in to an outlet and turning the printer on/off" (gpage 18).
2
Plug one end of the USB cable into the USB connector on the digital camera, and
then plug the other end into the PictBridge connector on the rear of the printer.
3
Turn on the digital camera and prepare it for printing.
The Access indicator on the printer turns on for a few moments and then turns off.
For details on how to use the digital camera, refer to the instruction manual supplied with the digital
camera.
Printing pictures from a digital camera
EN-25