36 | HRG Performance Series DVR User Guide
Shutting Down the HRG DVR
1.
2.
3.
Rebooting and Locking the HRG DVR
While in the Shutdown menu, you can also reboot or lock your HRG DVR. Locking your HRG
DVR will return you to the Live View mode, which requires a user name and password to exit out
of it. The Reboot button reboots your HRG DVR.
1.
2.
Using the Setup Wizard
By default, the Setup Wizard prompt appears when you turn on the HRG DVR (see
The Setup Wizard guides you to configure some of the important settings for your HRG DVR.
www.honeywellvideo.com
Click Menu
ShutDown to enter the Shutdown menu (see
Figure 2-1
Shutdown Menu
Click ShutDown.
Click Yes in the pop-up window to confirm that you want to shut down the HRG DVR.
Click Menu
ShutDown to enter the Shutdown menu (see
Click Lock or Reboot.
Note
If the check box is cleared
factory default settings are resumed.
If the check box is selected
HRG DVR is turned on.
Figure
Figure
, then the Setup Wizard will not run again until the
, then the Setup Wizard will start the next time the
2-1).
2-1).
Figure
2-2).