Table of Contents
Advertisement
Inside Features
The following figure shows the interior of the system and its major areas. A list of features
follow the figure.
A – Power Supply
B – System Board
C – Accessible Device Cage
The inside of the system has the following features:
system board with a Pentium processor, a Socket 370, three DIMM memory sockets, two
!
IDE connectors (primary and secondary), AGP connector, CNR board connector, diskette
drive connector, three PCI connectors, internal signal and power connectors, and external
device connectors
accessible device cage with:
!
— two accessible 5 1/4-inch slots for the CD-ROM drive or DVD-ROM drive and another
5 1/4-inch device
— two accessible 3 1/2-inch slots, one of which contains the 1.44-MB diskette drive
internal drive bracket with three 3 1/2-inch internal device slots, one of which contains the
!
standard hard drive
expansion slots support up to three PCI boards or two PCI boards and one CNR board
!
235-watt power supply
!
— power socket for connecting the system's power cable
— monitor power socket for plugging in the monitor power cable (requires a plug adapter)
— power supply fan for cooling the power supply and other system components to keep
them from overheating. Keep the area near the fan clear for proper ventilation.
— voltage switch for setting the voltage for the system to 115 volts or 230 volts.
the United States and Canada are 115 volts. Outlets in Europe are 230 volts.
Inside the System
D – Internal Drive Bracket
E – Expansion Board Slots
Set the switch correctly for the voltage in your area. Most wall outlets in
System Overview 1-9
Advertisement
Table of Contents
