Table of Contents
Advertisement
11
Utilities
To Add a Test Code I.D. Prefix to All Symbologies
This selection allows you to turn on transmission of a Code I.D. before the
decoded symbology. (See the Symbology Chart on
page 4-4
for the single
character code that identifies each symbology.) This action first clears all cur-
rent prefixes, then programs a Code I.D. prefix for all symbologies. This is a
temporary setting that will be removed when the unit is power cycled.
Add Code I.D. Prefix to
All Symbologies
Show Software Revision
Scan the barcode below to output the current software revision.
Show Revision
Show Data Format
Scan the barcode below to show current data format settings.
Data Format Settings
11 - 1
Advertisement
Table of Contents
