Table of Contents
Advertisement
E9 Send all but the last "nn" characters, starting from the current cursor posi-
tion. Syntax = E9nn (nn is the numeric value (00-99) for the number of
characters that will not be sent at the end of the message.)
Move Commands
F5 Move the cursor ahead "nn" characters from current cursor position.
Syntax = F5nn (nn stands for the numeric value (00-99) for the number of
characters the cursor should be moved ahead.)
F6 Move the cursor back "nn" characters from current cursor position.
Syntax = F6nn (nn stands for the numeric value (00-99) for the number of
characters the cursor should be moved back.)
F7 Move the cursor to the beginning of the data string. Syntax = F7.
EA Move the cursor to the end of the data string. Syntax = EA
Search Commands
F8 Search ahead for "xx" character from current cursor position, leaving cursor
pointing to "xx" character. Syntax = F8xx (xx stands for the hex value for
an ASCII code, see Decimal to Hex to ASCII Conversion chart,
F9 Search back for "xx" character from current cursor position, leaving cursor
pointing to "xx" character. Syntax = F9xx (xx stands for the hex value for
an ASCII code, see Decimal to Hex to ASCII Conversion chart,
E6 Search ahead for the first non "xx" character from the current cursor posi-
tion, leaving cursor pointing to non "xx" character. Syntax = E6xx (xx
stands for the hex value for an ASCII code, see Decimal to Hex to ASCII
Conversion chart,
E7 Search back for the first non "xx" character from the current cursor position,
leaving cursor pointing to non "xx" character. Syntax = E7xx (xx stands for
the hex value for an ASCII code, see Decimal to Hex to ASCII Conversion
chart,
page
4-5.)
Miscellaneous Commands
FB Suppress all occurrences of up to 15 different characters, starting at the
current cursor position, as the cursor is advanced by other commands.
When the FC command is encountered, the suppress function is termi-
nated. The cursor is not moved by the FB command. Syntax = FBnnxxyy
. .zz where nn is a count of the number of suppressed characters in the list
and xxyy .. zz is the list of characters to be suppressed. (xx stands for the
hex value for an ASCII code, see Decimal to Hex to ASCII Conversion
chart,
page
4-5.)
FC Disables suppress filter and clear all suppressed characters. Syntax = FC.
E4 Replaces up to 15 characters in the data string with user specified charac-
ters. Replacement continues until the E5 command is encountered. Syn-
tax = E4nnxx
characters to be replaced plus replacement characters; xx
ters to be replaced and xx
through zz
and zz
1
E5 Terminates character replacement. Syntax = E5.
page
4-5.)
xx
yy
yy
...zz
1
2
1
2
1
defines replacement characters, continuing
2
.
2
zz
where nn is the total count of both
2
page
4-5.)
page
4-5.)
defines charac-
1
5 - 3
Advertisement
Table of Contents
